Configuring VoIP on your trixbox Pro

From Trixbox Pro Help

If your trixbox Pro will be placing or receiving calls via a Voice over IP connection, additional configuration will be required.

You will you need to open your firewall to allow the VoIP connection in from your VoIP provider to get to your trixbox Pro. These ports will vary depending on your type of connection:

• IAX2

  UDP/4569

• SIP

  UDP/5060

  UDP/10000-51000

In addition to opening these ports, you will need to get the following information from your VoIP provider. This is just the example of the minimum information required, your VoIP provider may require additional configuration. Typically, the more information you can get, the better. Be sure to include this information, along with the contact information for your VoIP provider with the installation request email in Section 7.

Outbound

• Protocol

  IAX2 or SIP

• Hostname

  voip.myprovider.com

• Username

  myusername

• Password

  mypassword

• Incoming

  Protocol: IAX2 or SIP

• Hostname

  voip2.myprovider.com

• Username

  myusername

• Password

  mypassword

To add this information to your trixbox Pro, you simply log into the trixbox Pro Admin Panel, click on Options, voip.